The screw oil press has powerful functions

The screw oil press has powerful functions, but the amount of raw materials processed each time is from the starting point. Take a 100 type equipment as an example. If you open the machine once, you need at least 50 or more raw materials to press, because if the number of units is small, the processing cost is not enough to start the machine once, so the screw oil press is not suitable for the processing of small quantities of raw materials. The hydraulic oil press can complete this work. The hydraulic oil press can press 1-50kg of raw materials, and each start is simple and consumes less energy. This cost can be almost ignored, which is very suitable for the processing of a small amount of raw materials by consumers. In addition to this aspect, the hydraulic oil press is highly targeted. In terms of pressing sesame and peanut, the oil yield is 2-3 percentage points higher than that of the screw oil press, which is a very high oil yield for consumers. Therefore, you should know why the screw press can not replace the hydraulic press.