How can the automatic oil press operate to extract good oil? Many users are asking this question. Let's learn how to operate it!
Sieve degreasing edge
During inspection, if the screen surface is not horizontal, the length of the left and right arms shall be adjusted to be equal. If the screen is distorted, the eccentric axle can be adjusted to be perpendicular to the frame. If the oil on the surface of the stone mesh is single-sided, the frame level can be adjusted; If the air flow is uneven, adjust the frame adjustment plate to make the air flow blow evenly to the screen. If the network uncleanness rate is low, replace the brush or adjust the brush length and adjust the plane inclination angle.
Belt oil cannot be lifted
The main reason is that there is too much oil accumulation at the lower part of the bucket elevator conveyor and it is blocked. Open the plate door at the lower part of the conveyor to clean the oil accumulation.
Uneven steaming material in the pot
During the inspection, when the steam nozzle of the steam dryer is blocked or rusted, the steam nozzle shall be dredged. If the middle is the bottom of the blank oil tank, the distance between the scraper and the bottom of the oil tank can be adjusted; If the scraper is twisted and worn, be sure to replace the scraper; If the blank steaming and frying is uneven, the limit switch, contact and floating plate shall be adjusted to coordinate their work.
Drum overload does not rotate
The troubleshooting methods are as follows: when starting, there is oil between the rollers, loosen the adjusting bolts between the rollers and remove the oil between the rollers; If the feeding amount is too large and the speed is too fast, the feed inlet can be closed. If the thickness of the barrel is uneven, the drum clearance shall be readjusted and the loose nut shall be tightened.
The quality of the automatic oil press depends on the oil output. There are many factors that determine the technical setting of oil production. Automatic oil press itself, pressure and temperature of pressure chamber are the main factors affecting the performance of automatic oil press. The automatic oil press operates circularly, the oil line gap is 150 wires, the amount of slag is large, the pressure of the pressure chamber is reduced, the oil volume is reduced, and the pressure and yield of the pressure chamber are guaranteed. Electronic temperature control technology is adopted to ensure the appropriate oil outlet temperature of the pressure chamber and timely control the pressure and temperature required by different oils.