Maintenance method of new hydraulic oil press:
1、 The pressure oil in the oil pump of the oil press equipment shall be filtered, and the concentration shall not be too high. It is good to use rapeseed oil, soybean oil and peanut oil. It is forbidden to use gasoline, kerosene and other flammable oils.
2、 The oil tank shall be kept clean. The oil tank shall be cleaned and replaced with new oil every 3 months, or the oil in the tank shall be taken out and filtered before use. Impurities in the oil will wear the oil pump and block the oil circuit, affecting the operation of the oil press.
3、 The pressure oil in the oil pump shall be filtered and the concentration shall not be too high. It is good to use rapeseed oil, soybean oil and peanut oil. It is forbidden to use gasoline, kerosene and other flammable oils.
4、 The oil press shall be installed indoors to avoid rust and oil pollution caused by wind and rain.
5、 The connecting pin shaft between the handle and the oil pump shall be lubricated frequently to reduce wear.
6、 During long-term parking, the machine shall be wiped, oiled and covered with protective cover.
Users must pay attention to the above points. They must not operate blindly. In that case, the gain is not worth the loss. For more information on the new hydraulic press.
